0 Wishlist: 0 Items 0 Basket: 0  Items /  0,00
{ "@context":"http://schema.org/", "@type":"BreadcrumbList", "itemListElement": [{"@type":"ListItem","position":1,"item":{"@id":"\/","name":"Home"}},{"@type":"ListItem","position":2,"item":{"@id":"\/paints-lacquers\/","name":"Paints & Lacquers"}},{"@type":"ListItem","position":3,"item":{"@id":"\/paints-lacquers\/brands\/","name":"Brands"}},{"@type":"ListItem","position":4,"item":{"@id":"\/paints-lacquers\/brands\/wilckens\/","name":"Wilckens"}},{"@type":"ListItem","position":5,"item":{"@id":"https:\/\/www.fancyhometrends.com\/paints-lacquers\/wilckens-liquid-plastic-floor-coating-silk-matt-5l_63222826_132685\/","name":"Wilckens Liquid Plastic Floor Coating silk matt 5L"}}] }
Wilckens Liquid Plastic Floor Coating silk matt 5L

Wilckens Liquid Plastic Floor Coating silk matt 5L

  • Item number: 12672200090
  • Manufacturer: Wilckens Farben GmbH
  • Brand Name:
Wilckens Farben GmbH Logo
Wilckens Farben GmbH Logo
€20.41
(Base price: €4.08/liter) excl. tax + shipping**
(ready for shipping 1-3 working days)

Special coating for floor surfaces from Wilckens 5 litres

The easy-to-apply liquid plastic floor coating from Wilckens is an acrylate-based floor coating that is suitable for all types of floors with normal foot traffic, e.g. basement floors, cement plinths, screed, concrete stairs, plaster, masonry or wood. Due to its good UV and weather resistance, the special coating can be used both indoors and outdoors. However, this coating is not suitable for garage floors or surfaces with standing water or permanent wetness. The tough concrete coating is also flexible, water-dilutable, abrasion-resistant and resistant to oils, greases and common household alkalis.

Application:

The substrate must be clean, dry, free of oil and grease, stable and absorbent. Moisture must be excluded. Remove loose coats, sand down adhering old coats well (wear a dust mask) and test for compatibility (test coat). Mechanically remove cement slurries and sintered layers as well as friable surface layers. Concrete and cement substrates must have set for at least 4 weeks. Roughen smoothed cement surfaces. Prime critical and highly absorbent substrates. Do not apply to horizontal surfaces that are exposed to constant moisture. Balcony floors should have a slight gradient. Moss and algae must be removed from outdoor areas. When using several containers, ensure that the batches are identical. Stir well with a stirring stick before use and apply evenly. 

Coating structure on:

1. new concrete, screed and wood

a) Properly prepare the substrate

b) Prime 1 x with adhesion promoter

c) Prime the outside of untreated wood with wood primer (blue stain protection)

d) Paint 2 - 3 x undiluted, whereby the 1st coat can be diluted with approx. 20 % water

2. old coats or renovation coats

a) Prepare the substrate professionally (see above)

b) Prime once with adhesion promoter

c) 1 - 2 coats undiluted 

Consumption:

approx. 10 m² / l (sufficient for approx. 7.5 m²)

  • Colour: see selection
  • Content: 5 litres (sufficient for approx. 50 m²)
  • Drying time: approx. 3 days (can be recoated/walked on after 12 hours, touch-dry after 6 hours, dust-dry after approx. 2 hours)
  • Area of application: Indoor and outdoor floor surfaces, not suitable for garage floors or surfaces with standing water or permanent wet loads
  • Properties: water-dilutable, abrasion-resistant, low-odour, good UV resistance, good weather resistance, resistant to oils, greases and common household alkalis


  • EU Responsible person
  • Wilckens Farben GmbH
  • Schmiedestraße 10, 25348 Glückstadt, Germany
  • info@wilckens.com
  • 49 (0)4124 / 60 60
  • Manufacturer
  • Wilckens Farben GmbH
  • Schmiedestraße 10, 25348 Glückstadt, Germany
  • info@wilckens.com
  • 49 (0)4124 / 60 60

Don't forget this