Name: Floor coating Vectra 2in1 floor sealer 2.5l
Brand: Vectra
SKU: Vectra Fußbodensiegel 2,5l
Price: 18.49 EUR
Availability: InStock

Floor coating Vectra 2in1 floor sealer 2.5l

-52%

Floor coating Vectra 2in1 floor sealer 2.5l

Item number: VectraFußbodensiegel2,5l
Manufacturer: Vectra

-52% You save: 17,22 €

~~RRP: €32.76~~

€15.54

(Base price: €6.22/liter) excl. tax + shipping**

(ready for shipping 1-3 working days)

You have a question?

Floor coating Vectra 2in1 floor seal silk matt 2.5l

Seal indoor and protected outdoor floors with the Vectra floor seal in silk matt. This is how you reliably protect your floors in the hobby room or basement area made of plaster and concrete. The satin-matt, water-dilutable floor coating is easy to work with, hard-wearing and weather-resistant, as well as insensitive to water and household cleaning agents.

Application:

The Floor coating can be applied by rolling or brushing and should be stirred well before use.

New paint: For priming apply the product diluted with 10% water. To do this, fill the material into an empty container and mix evenly with the water while stirring. This is followed by the intermediate coat: apply this product diluted with 5% water. To do this, fill the material into an empty container and mix evenly with the water while stirring. For the final top coat: apply this product undiluted .

Subsurface:

Plaster, concrete, masonry, screed in hobby rooms, basement areas, exhibition and storage rooms that are not used and on covered balconies Not suitable for Garage floors.

Subsurface preparation:

To ensure secure adhesion and to enable a perfect coat of paint, prepare the subsurface as described below.

The surface to be painted must be clean, dry, free of dust and grease, firm and stable

Remove all cement slurry, limescale deposits, oxide layers or release agents and wash thoroughly

< li> new concrete surfaces at least 4-6 weeks dry

Sand and clean well-preserved old coats

Remove unstable, flaking coatings without leaving any residue

The substrate must be protected from rising damp, otherwise it will The floor coating will detach

Drying time:

Surface dry: approx. 2 hours

Can be painted over: approx .12 hours

Container size: 2.5 litres

Colour: see selection, silk matt

Area of application: Interior and exterior

Range: approx. 8 m²/l

Properties: Can be thinned with water, easy to apply, quick drying, resistant, low odour, tread and impact resistant, abrasion resistant