Wilckens Tinting Paint Mixing Flat Acrylic Painting 6 Colours 750ml

The tinting paint by Wilckens is a water dilutable dispersion paint, which can be used for indoor and outdoor paintings. In particular, the flat colour can be used for creative mixing of dispersion, latex and facade paints. For this purpose, you can use this tinting paint to create your individual paint colouration.

Notice: There are additional sizes available.

Processing advise: Please read the product labeling carefully before you use this product and follow the dangers and safety instructions. The substrate has to be clean, dry, free of oil, grease and load. Remove non-load bearing and peeling paint. New plasters must be at least 4 weeks hard-dry. Critical and strongly absorbent substrates with acrylic deep foundation. Stir well before use.

Danger/Caution: If medical advice is required, have packaging or label ready; keep out of the reach of children; use dust filter P2 for grinding work; use combination filter A2/P2 for spraying work; ensure good ventilation during processing and drying; Avoid eating, drinking and smoking while using the paint; in case of contact with eyes or skin, rinse immediately with plenty of water; do not allow to enter drains, water or soil; only empty containers should be handed over for recycling; dried material residues can be disposed of as household waste.

Safety data sheets can be found under Info-Download.

Product type: Tinting Paint Mixing / Flat Acrylic Colour
Colour: see selection, flat
Volume: 750 ml (additional sizes available)
Application: indoor and outdoor
Characteristics: intensive colour, excellent opacity and lightfastness, breathable, solvent-free , weatherproof, easy processing
Distinctions: certified by "Der Blaue Engel", certified by EN 13300, excellent washability (scrubbable)

The drying time depends on the substrate (at 20°C, 65% rel. humidity):

workable dry: approx. 3-4 hours (Lower temperatures and higher humidity increase the drying time!)

further informations