0 Wishlist: 0 Items 0 Basket: 0  Items /  0,00
{ "@context":"http://schema.org/", "@type":"BreadcrumbList", "itemListElement": [{"@type":"ListItem","position":1,"item":{"@id":"\/","name":"Home"}},{"@type":"ListItem","position":2,"item":{"@id":"\/paints-lacquers\/","name":"Paints & Lacquers"}},{"@type":"ListItem","position":3,"item":{"@id":"\/paints-lacquers\/colours-paints\/","name":"Colours & Paints"}},{"@type":"ListItem","position":4,"item":{"@id":"https:\/\/www.fancyhometrends.com\/paints-lacquers\/colours-paints\/wilckens-plaster-from-the-roll-20kg-ready-to-use-white_63217033_125542\/","name":"Wilckens plaster from the roll 20kg ready to use white"}}] }
Wilckens plaster from the roll 20kg ready to use white
Wilckens plaster from the roll 20kg ready to use white
Wilckens plaster from the roll 20kg ready to use white 1

Wilckens plaster from the roll 20kg ready to use white

  • Item number: 16291011130
  • Manufacturer: Wilckens Farben GmbH
Wilckens  Logo
€40.75
(Base price: €2.04/kilogram) excl. tax + shipping**
(ready for shipping 1-3 working days)

Ready-to-use plaster for creative wall design

Wilckens plaster on a roll is a ready-to-use plaster effect paint that can be rolled up like paint. The plaster is suitable for renovation work indoors and outdoors for decorative, white and renovation coatings with a matt, slightly structured surface. The structure of the roller is transferred to the wall when plastering. The white plastic dispersion paint can be applied both indoors and outdoors to masonry, concrete, plasterboard, fiber cement, wood or adhesive old dispersion coatings. In addition, it is weatherproof, impact-resistant, breathable, odorless and solvent-free.

Processing:

The paint should not be used at temperatures below +8°C (applies to the environment and subsurface) and  ;not be processed in high heat or direct sunlight. The surface must be suitable, clean, dry, level, load-bearing, absorbent and adhesive. Completely remove non-intact/unsuitable coatings before painting and smooth out any unevenness in the wall with a spatula. Prime porous, slightly sanding or chalking, strongly/unevenly absorbent substrates with solvent-free deep primer. Prime all substrates once with Putzhaftgrund (let dry for at least 24 hours). Thoroughly wash off distemper/lime paints and chalking surfaces. Stir well before use. Roll up the plaster evenly and undiluted with a short-pile paint roller (dilute with water if necessary) and, if desired, shape it as you like within 20 minutes using a structuring tool (surface brush, paintbrush, structuring/pea-holed roller, sponge, spatula, etc.). Use stainless tools. To avoid overlaps, coat connected surfaces without interruption. Clean tools with water immediately after use.

Consumption:

approx. 0.7 m²/L  for one coat, depending on the condition / absorbency of the substrate / layer thickness

Caution! Contains 1,2 benzisothiazol-3(2H)-one ; Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. 

  • Colour: white
  • Content: 20 kg (enough for approx. 30 m²)
  • Yield: approx. 0.7 m²/litre, with one coat on a smooth surface
  • Drying time: approx. 2 - 3 days depending on the layer thickness
  • Properties: for inside and outside, weather-resistant, impact-resistant, breathable, odorless, ready to use, solvent-free

Don't forget this